How to Make Copper Sulfate

Reviewed by Anne Schmidt

Last Updated: February 19, 2024 References

Copper sulfate is usually encountered as a blue liquid solution, or in blue crystalline form, and is often used in chemistry classes because it is relatively simple to make, and it can be used to demonstrate many interesting reactions, and grow beautiful blue crystals. Copper sulfate also has many practical uses in agriculture, pool maintenance, and the arts and can be readily purchased at many online retailers for these applications.^{[1]
X
Research source} You can make copper sulfate at home or in the classroom in a number of ways. Just remember that copper sulfate is a skin irritant that is toxic if ingested. Use caution and appropriate safety gear when handling chemicals, and dispose of them carefully after your experiment.

Method 1

Method 1 of 3:

Making Copper Sulfate Using Hydrogen Peroxide

Download Article

1
Assemble your safety gear. You will need eye protection, a lab coat or heavy long sleeve shirt to protect yourself from splashes, and acid-resistant (latex or nitrile) gloves. You should also keep a box of baking soda (sodium bicarbonate) on hand to neutralize any acid spills.
- Sulfuric acid is highly corrosive. Be careful not to spill or splash it.
- If you get sulfuric acid on your skin, immediately flush your skin with soap and cool water for at least 15 minutes, and seek medical attention.
- If you splash sulfuric acid in your eyes, flush your eyes for at least 30 minutes with cool water and seek medical attention. WEAR GOGGLES to prevent this from happening!
- If you spill acid on a surface, cover the spill with baking soda. Wait for the bubbling to stop. Then carefully wipe up all affected surfaces with a sponge or paper towels, and wash all of the material collected down the sink with plenty of water.
2
Assemble your equipment. You will need a glass beaker or jar to perform the experiment in, and a glass measuring cup with milliliter gradations, or a glass eyedropper. You may also need a glass stir stick or spatula for retrieving excess copper pieces from the solution, and a scale to weight the copper.
- Do not use metal or plastic measuring spoons, as they will react with the acid.
Advertisement
3
Find a suitable workspace. This experiment will put off hydrogen (h₂) gas, which is extremely combustible, and should only be done outdoors or under a laboratory vent hood, away from any open flames or ignition sources. You should also set up your experiment on an acid resistant surface, preferably one that is glass, or specifically chemical resistant.^{[2]
X
Research source}
- If you don't have a chemical-resistant surface to work on, you should at least put a sheet of thick cardboard under your work area. The sulfuric acid will dissolve the cardboard, but slowly enough that you can neutralize the spill with baking soda before it eats clear through.
For this you will need 30% hydrogen peroxide, and concentrated (98%) sulfuric acid. Both of these can be purchased at a scientific supply company, although the hydrogen peroxide can also be ordered from major online retailers. You will also need a few inches of copper wire, or some chunks of copper pipe, available at any hardware store.^{[3]
X
Research source}
5
Create the acid solution. Place 10 milliliters (0.34 fl oz) 30% hydrogen peroxide in a beaker. Then add 3 milliliters (0.10 fl oz) concentrated sulfuric acid. This is called "Piranha solution" and will heat up quickly, so be extremely careful.
- Never attempt to cover a beaker or vessel containing Piranha solution; it can explode.
6
Add the copper. Carefully place about 3g of copper wire or metal chunks into the solution.
- Do not use pennies for this experiment, as they contain a lot of metals besides copper and may cause unexpected reactions.^{[4]
  X
  Research source}
Bubbles will begin to form around the copper, and the clear liquid in the jar will begin to turn blue. Leave the copper in the solution until the bubbles stop forming. This can take several minutes, depending on the temperature and concentration of your solution. Carefully lift out any remaining copper with a glass spatula or stirring rod. You should now be left with an aqueous copper sulfate solution.^{[5]
X
Research source}
If you wish to collect the copper sulfate crystals, pour the copper sulfate solution into a shallow glass dish and leave it exposed to air for several days while the remaining liquid evaporates. Remember that the solution is still caustic, and use care in handling it.^{[6]
X
Research source} You can then use your copper sulfate crystals in various experiments, or to grow larger crystals.^{[7]
X
Research source}
Copper sulfate is toxic to fish, plants, and other wildlife and should not be poured into lakes or streams, or rinsed down the storm drain. Copper sulfate is a common ingredient in many drain cleaners, and small quantities, like what this experiment will yield, can be safely diluted with water and rinsed down the sink.

Method 2

Method 2 of 3:

Making Copper Sulfate Using Nitric Acid

Download Article

Nitric acid is considerably more hazardous than sulfuric acid, so be very cautious during this experiment.^{[8]
X
Trustworthy Source

Centers for Disease Control and Prevention
Main public health institute for the US, run by the Dept. of Health and Human Services

Go to source} You will need eye protection, acid-resistant gloves and a lab coat.
Because of the risks involved with using nitric acid, this experiment should only done in a laboratory setting. As this experiment will put off toxic fumes (NO₂ gas), it must be done under a fume hood.
You will need a glass beaker or jar to perform the experiment in, a glass measuring cup with milliliter gradations, or a glass eyedropper, and a glass stirring rod or spatula to remove excess copper chunks, and a scale to measure the copper.
For this you will need water, nitric acid (70%), and concentrated (98%) sulfuric acid. These can be purchased at a scientific supply company. You will also need a few inches of copper wire, or some chunks of copper pipe, available at any hardware store.^{[9]
X
Research source}
First place 30 milliliters (1 fl oz) of water in the beaker. Then add 5 milliliters (0.17 fl oz) of nitric acid and 3 milliliters (0.10 fl oz) concentrated sulfuric acid.^{[10]
X
Research source}
6
Add the copper. Carefully drop about 6g of copper wire or metal chunks into the solution. Stand back away from the fumes, and watch the reaction take place. A brown gas will form, bubbles will form as the copper dissolves, and the liquid in the beaker will turn blue. The reaction is complete when the bubbling stops.^{[11]
X
Research source}
- The gas that results from the reaction is toxic, and should not be inhaled.
If you wish to collect the copper sulfate crystals, pour the copper sulfate solution into a shallow glass dish and leave it exposed to air for several days while the remaining liquid evaporates. Remember that the solution is still caustic, and use care in handling it.^{[12]
X
Research source} You can then use your copper sulfate crystals in various experiments, or to grow larger crystals.^{[13]
X
Research source}
Copper sulfate is toxic to fish, plants, and other wildlife and should not be poured into lakes or streams, or rinsed down the storm drain. Copper sulfate is a common ingredient in many drain cleaners, and small quantities, like what this experiment will yield, can be safely diluted with water and rinsed down the sink.

Method 3

Method 3 of 3:

Making Copper Sulfate Using Electrolysis

Download Article

1
Assemble your safety gear. You will need eye protection, a lab coat or heavy long sleeve shirt to protect yourself from splashes, and acid-resistant (latex or nitrile) gloves. You should also keep a box of baking soda (sodium bicarbonate) on hand to neutralize any acid spills.
- Sulfuric acid is highly corrosive. Be careful not to spill or splash it.
- If you get sulfuric acid on your skin, immediately flush your skin with soap and cool water for at least 15 minutes, and seek medical attention.
- If you splash sulfuric acid in your eyes, flush your eyes for at least 30 minutes with cool water and seek medical attention. WEAR GOGGLES to prevent this from happening!
2
Find a suitable workspace. This experiment will put off hydrogen (h₂) gas, which is extremely combustible, and should only be done outdoors or under a laboratory vent hood, away from any open flames or ignition sources. You should also set up your experiment on an acid resistant surface, preferably one that is glass, or specifically chemical resistant.^{[14]
X
Research source}
- If you don't have a chemical-resistant surface to work on, you should at least put a sheet of thick cardboard under your work area. The sulfuric acid will dissolve the cardboard, but slowly enough that you can neutralize the spill with baking soda before it eats clear through.
3
Assemble your equipment. You will needs a 6-volt battery, a glass jar or beaker, 2 lengths of copper wire, concentrated sulfuric acid solution (available at scientific supply stores), a glass measuring beaker or eyedropper, and water.
- If you do not have access to concentrated sulfuric acid solution, you can use battery acid, which is 30-35% sulfuric acid and is available at hardware and auto parts stores.
Add 30 milliliters (1 fl oz) of water to the beaker, and 5 milliliters (0.17 fl oz) of concentrated sulfuric acid. If you are using the less concentrated battery solution, add 15 milliliters (0.51 fl oz) of acid to 20ml of water.
The wires should be an inch or so apart, depending on the size of your container, and should not be touching each other.^{[15]
X
Research source}
One wire should be wrapped around the positive terminal, and one should be wrapped around the negative terminal.
You should see bubble forming at the anode (the wire connected to the negative terminal) but not the cathode, and the solution will begin to turn blue as the copper sulfate is formed. Let the reaction run until the solution is quite blue, and then remove the wires from the solution and disconnect them from the battery.
You can evaporate the solution by pouring it into a shallow glass dish that is exposed to the air for several days. You can also speed the process up by boiling the solution carefully in a heat-resistant (pyrex or borosilicate) pan, and then pouring off the last bit of sulfuric acid that does not evaporate. Be careful, as the solution in question is caustic and should be handled with great care.
Copper sulfate is toxic to fish, plants, and other wildlife and should not be poured into lakes or streams, or rinsed down the storm drain. Copper sulfate is a common ingredient in many drain cleaners, and small quantities, like what this experiment will yield, can be safely diluted with water and rinsed down the sink.

Community Q&A

Search

Add New Question

Question

Does the sulfuric acid have to be 98%?

Community Answer

No. As stated above, you can use diluted sulfuric acid, such as battery acid.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 7
Question

Will sulfuric acid harm me in any way?

Community Answer

Yes! Avoid contact with your skin and eyes, and do not ingest it!

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 15
Question

What is the chemical equation for this reaction?

TomPN

Top Answerer

The second reaction proceeds in two steps: 1) Cu + 4HNO3 --> Cu(NO3)2 + 2H2O + 2NO2 2) Cu(NO3)2 + H2SO4 --> CuSO4 + 2HNO3

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 7 Helpful 16