Fuse panel on the 86
Locked
Fuse panel on the 86
 
|
Has someone got a good picture of this with all fuses marked ? .Also was the fuse box cover the first thing to fall off these trucks ? . If anyone has a cover for sale let me know , can pay through PayPal email address . And can anyone tell me what that plug was for . Cheers
1986 F150 Lariat Supercab 302 efi , soon to have a 385 ci w , forged crank,king bearings , crower billet rods, Auto tech forged pistons world products Snr heads , Comp retro fit 35-421-8 HR, steel roller lifters , Milodon single idle gear drive , Mallory dual sync dissy ,Motec ECU , Profesional products intake , 75 mm TB , 40lb EV1 , Doug thorly Tri-y long tubes , Block 1974 with 1990 serpentine front drive and new Motorcraft A/C pump , will put 3G alternator on it , ford racing diff cover and have a new track-loc , to fit . I have converted it to a 5 speed Tremec TR4250 as the AOD died .
|
Re: Fuse panel on the 86
Administrator
|
The 1986 EVTM (Documentation/Electrical/EVTM/1986 EVTM in the menu has the page below, as well as a schematic for every circuit on your truck and many diagrams showing connectors, locations, etc.
But the covers did get tossed. Hopefully someone has one. As for the plug, I'm pretty sure that is C1101 that goes to the trailer brake controller. Go to the Trailer Option pages in the '86 EVTM and see if the colors don't match what you have. 
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Re: Fuse panel on the 86
|
Re: Fuse panel on the 86
|
In reply to this post by Gary Lewis
Trailer brake controller, would the 81 truck also have them  I don't remember seeing that plug, have to go look, but also was not looking for it when I installed the harness or is that part of the trailer tow harness? It would be nice but I just wonder what the wires are? Power in, brake light feed, ground? Power out, blue normally, would be a heavy gauge wire to the rear of the truck. edit I got to read the post before I start typing  now to go look over that page
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1 81 F100 style side 300 six/SROD parts truck -RIP http://cars.grantskingdom1.com/index.php/1981-Ford-F100 |
Re: Fuse panel on the 86
|
Administrator
|
Part of the trailer option. Power in, power out to the brakes, and power out to the trailer brake lights.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Re: Fuse panel on the 86
|
|
Re: Fuse panel on the 86
|
|
Re: Fuse panel on the 86
|
Re: Fuse panel on the 86
Administrator
|
Re: Fuse panel on the 86
|
Administrator
|
In reply to this post by Littlebeefy
Yes, I do. Thanks for checking.  Seriously though, I put the part numbers for the fuse box and the covers here: Documentation/Electrical/Circuit Protection and on the Fuse Box Part Numbers tab.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Re: Fuse panel on the 86
|
|